DISABLING IRQ STEERING  (WIN95)

Since Microsoft says IRQ Steering is not supported (which explains why it's only halfway implemented), you should DEFINITELY make sure it's disabled!  Here's how.

1. Open your System control panel, to Device Manager. 

In case you've forgotten how to open the "System Control Panel":
  1. Open the Windows Contol Panel.
  2. Double-click on "System."
  3. Click on the "Device Manager" tab.

2. Double-click on System Devices (Fig. 1).

Fig. 1
SYSTEM DEVICES

3. Double-click on PCI bus, and click the Settings tab (Fig.2)

Fig.2
PCI Bus: Settings

4. 'Use Hardware' for the device enumeration works for us!

5. Next click on the IRQ Steering tab (Fig. 3).

Fig. 3
PCI Bus: IRQ Steering

6. UNCHECK the 'Use IRQ Steering' box, so that this "feature" is disabled!

7. Click "OK" and reboot your machine! 

You're done!
BACK

Once again, keep in mind that these are the settings that we used to get this setup working.

Questions? Comments? Email us at info@sonorus.com.
[end]  
 

Macintosh is a trademark of Apple Computers, Inc.
Windows 95, Windows MM System are trademarks of Microsoft Inc.
Studi/o is a trademark of Sonorus, Inc.
Copyright © 1997 Sonorus, Inc. All rights reserved