|
AES/EBU inputs:
~standard XL connector
~jumperable 110/75 ohm termination
~jumperable ground lifts
~no copy code
~receives all formats (AES, SPDIF, etc.)
~sample rate converter follows input 8-48Khz
~jitter attenuation
~resolution: 20 bits (sample rate converter on) or 24 bits
(SRC off)
~dynamic range: 120dB (SRC on) or 144dB (SRC off)
~each input has independant sample rate conversion
AES/EBU outputs:
~standard XL connector
~jumperable cable equalization
~jumperable ground lifts
~switchable AES/EBU or SPDIF data format
~subcodes programmable via STUDI/O (or follow selected input
status)
~passes thru DAT start ID's from AES/SPDIF inputs
~resolution: 24 bits
TDIF:
~works with all TDIF equipment
~standard metric db25 connector
~resolution: 16, 20, or 24 bits (jumperable, also
auto-detect from AES input resolution)
~special DA-88 compatibility mode
OUTPUT SWITCHING:
~each output has independantly selectable
input source, or mute
~can be used as a four-stream independant sample-rate
converter AES-to-AES
CLOCK:
~illuminated switches indicate clock source,
flash if unlocked
~internal 48KHz or 44.1KHz crystal, AES input 1, TDIF,
Word/Video/AES3id, ADAT
~Word clock input autodetects video input, switches to video
lock
~Lock to video supports PAL, NTSC, B&W and
pullup/pulldown
~Word clock input also autodetects AES input, switches to
AES lock
~switchable 75 ohm terminator on word clock input
~word clock out reflects currently connected clock (or
jumperable to hardwired loop-thru)
ACTIVITY/STATUS LED's
~individual input or output channel activity
monitoring
~status indication of all possible clock and data error
conditions
ADAT
interface:
~exclusive Sonorus 24 bit interface
~user bits send status and receive programming info
~jumperable output boost for extra long cable drive
| 
